Overview

A long lasting and durable paint ideal for the renovation of uPVC windows, conservatories, doors and front doors. The flexible formulation resists cracking and leaves you with a stain and mould resistant surface to keep your windows and doors looking fresher for longer. It's easy to apply with no need for a primer and rainproof in only one hour. Available in five colours in a beautiful satin finish.

• Resists cracking and flaking
• Mould and stain resistant
• Easy to apply with no primer needed
• Satin finish available in a range of colours
• Durable formulation

Preparation

Thorough preparation will give you a smooth finish with long lasting protection.

• Ensure the surface is clean, dry and free from dirt, dust and grease.
• Clean the surface with warm soapy water, rinse and allow to thoroughly dry before painting.
• Lightly sand bare surfaces with a 180-220 grit sandpaper, if the surface has been previously painted and in good condition sand with a 240 grit sandpaper. For flaking paint sand with a 120 grit sandpaper.
• Ensure to remove any dust before you start to paint.
• Do not paint new uPVC for at least 12 months.

Application

We recommend performing a test to ensure compatibility with the surface, always follow the manufacturer's instructions found on the packaging.

• Stir the paint well to achieve a smooth consistency.
• Apply using a brush or roller, allowing 2-4 hours between coats.
• We recommend applying two coats however if you are painting over a dark colour you may need a third coat.